一种通过梯形PPMgLN波导倍频实现带宽可调谐光源的理论研究

本文设计了一种梯形的周期极化掺镁铌酸锂(PPMgLN)波导,并通过在传播方向上引入温度梯度来拓宽其倍频(SHG)过程的泵浦光源可接收带宽。通过有限差分的光束传输法,计算波导的有效折射率,并进行波导尺寸的设计。结果表明,通过改变梯形波导不同位置的温度,使其形成一个温度梯度,可拓宽泵浦光源的波长可接收带宽。本文所设计的PPMgLN波导最大泵浦光源可接收带宽为C波段,即1 530~1 565 nm,该波导可倍频C波段,得到输出波段带宽为765~782.5 nm,温度调谐范围为30~150 ℃。     

Effect of thickness variations of lithium niobate on insulator waveguide on the frequency spectrum of spontaneous parametric down-conversion

We study the effect of waveguide thickness variations on the frequency spectrum of spontaneous parametric down-conversion in the periodically-poled lithium niobate on insulator (LNOI) waveguide. We analyze several variation models and our simulation results show that thickness variations in several nanometers can induce distinct effects on the central peak of the spectrum, such as narrowing, broadening, and splitting. We also prove that the effects of positive and negative variations can be canceled and thus lead to a variation-robust feature and an ultra-broad bandwidth. Our study may promote the development of on-chip photon sources in the LNOI platform, as well as opens up a way to engineer photon frequency state.     

Asymmetric nonlinear-mode-conversion in an optical waveguide withPT symmetry

Asymmetric mode transformation in waveguide is of great significance for on-chip integrated devices with one-way effect, while it is challenging to achieve asymmetric nonlinear-mode-conversion (NMC) due to the limitations imposed by phase-matching. In this work, we theoretically proposed a new scheme for realizing asymmetric NMC by combining frequency-doubling process and periodic PT symmetric modulation in an optical waveguide. By engineering the one-way momentum from PT symmetric modulation, we have demonstrated the unidirectional conversion from pump to second harmonic with desired guided modes. Our findings offer new opportunities for manipulating nonlinear optical fields with PT symmetry, which could further boost more exploration on on-chip nonlinear devices assisted by non-Hermitian optics.     

Analysis,design and simulation of MIM plasmonic filters with different geometries for technical parameters improvement

In this paper, four optical filter topologies based on metal–insulator–metal waveguides are proposed and the designed structures are investigated numerically using finite-difference timedomain method. Triangular-shaped adjunctions have been added to the filter structures to improve their transmission spectrum. These improved structures consist of air as the insulator and silver as the metal. The relative permittivity of metal has been described via the Drude,Drude–Lorentz, and Palik models. The first filter's transmission spectrum shows an acceptable transmittance. In the second optimized filter, the transmission spectrum has been improved. The transmittance spectrum can be tuned through adjusting the edge of the triangle in these four optimized filters. As a result, the bandwidths of resonance spectra can be adjusted. The theory of such tapered structures will be investigated by the tapered transmission line and will be solved with the transfer matrix method. This method shows a better performance and higher transmission efficiency in comparison with the basic structures. On the other hand, the final filter has been chosen as the best one because of its hexagonal resonator. The main reason for having a better result is due to a longer interaction length in comparison with the circular resonator. This in turn creates much better energy coupling and results in higher transmission.     

Interplay of local resonances and Bragg band gaps in acoustic waveguides with periodic detuned resonators

This letter is concerned with acoustic wave propagation and transmission in acoustic waveguides with periodically grafted detuned Helmholtz resonators. The interplay of local resonances and Bragg band gaps in such periodic systems is examined. It is shown that, when the resonant frequencies of the resonators are tuned close to a Bragg band gap, the behavior of the Bragg band gap can be affected dramatically. Particularly, by introducing appropriately tuned resonators, the bandwidth of a Bragg band gap can be reduced to zero, leading to a very narrow pass band with great wave attenuation performance near both band edges. The band formation mechanisms of such periodic waveguides are further examined, providing explicit formulae to locate the band edge frequencies of all the band gaps, as well as the conditions to achieve very narrow pass bands in such periodic waveguides.     

Generation of NOON States in Waveguide Arrays

A method to generate NOON states with three photons by injecting photons in an array of three waveguides is presented. Conditional measurements project the wave function in a given (desired) state. In passing, it is shown how the array of three waveguides, that effectively reproduces the interaction of three fields, may be reduced to the interaction of two fields.     

Operation of low driving voltage cascaded modulator over non-cascaded modulator for 4 dB extinction ratio at 100 giga bit per second (Gbps)

This paper describes improved results when comparing cascaded traveling wave electro absorption modulator (TWEAM) to non-cascaded TWEAM by simulation. Large signal modeling is used for both types of modulators to achieve 4 and 10 dB extinction ratios (ERs) with flat frequency response for applications in short distance as well as long distance optical fiber communication. To obtain 4 and 10 dB ERs with 110 GHz 3 dB bandwidth, a cascaded TWEAM requires 0.4 V peak to peak (V_P-P) and 1 V_P-P input driving voltages respectively. A non-cascaded TWEAM requires about two times the input driving voltage compared to the cascaded modulator to achieve the same values of ER and 3 dB bandwidth. Both modulators have been simulated with the same bias and also use the same circuit parameters except for the total active segment lengths (1 and 0.5 mm for cascaded and non-cascaded modulator respectively) and microstrip lengths to obtain the same ERs and 3 dB bandwidths.     

Collocation discretization for an integral equation in ocean acoustics with depth‐dependent speed of sound

We analyze two collocation schemes for the Helmholtz equation with depth‐dependent sonic wave velocity, modeling time‐harmonic acoustic wave propagation in a three‐dimensional inhomogeneous ocean of finite height. Both discretization schemes are derived from a periodized version of the Lippmann‐Schwinger integral equation that equivalently describes the sound wave. The eigenfunctions of the corresponding periodized integral operator consist of trigonometric polynomials in the horizontal variables and eigenfunctions to some Sturm‐Liouville operator linked to the background profile of the sonic wave velocity in the vertical variable. Applying an interpolation projection onto a space spanned by finitely many of these eigenfunctions to either the unknown periodized wave field or the integral operator yields two different collocation schemes. A convergence estimate of Sloan [J. Approx. Theory, 39:97–117, 1983] on non‐polynomial interpolation allows to show converge of both schemes, together with algebraic convergence rates depending on the smoothness of the inhomogeneity and the source. Copyright © 2016 John Wiley & Sons, Ltd.     

Label-free immunosensor for monitoring vitellogenin as a biomarker for exogenous oestrogen compounds in amphibian species

A label-free, optical waveguide lightmode spectroscopy based immunosensor was developed for frog (Bombina orientalis) vitellogenin (Vtg) determination in biological samples as a biomarker for exogenous oestrogen compounds. Antibody against Vtg was produced in rabbits immunised with purified lipovitellin (Lpv), a precursor of Vtg, from the homogenised ovary of oriental fire-bellied toads (B. orientalis). The purified protein and Lpv/Vtg-specific serum were applied in both competitive and direct immunoassay formats using optical waveguide lightmode spectroscopy immunosensor. When measuring Vtg in direct manner, the Lpv antibody (1.76 µg mL^?1) was immobilised on the sensor surface, and the linear measuring range for Vtg was 0.1–10 µg mL^?1. During the competitive measurement, 100 ng mL^?1 Lpv was applied for the immobilisation. The linear measuring range for Vtg was 0.5–50 ng mL^?1. We studied the relative substrate specificity of the antibody, and it was concluded that the method is suitable for the sensitive and selective determination of Vtg levels in toads. Heart, liver and gonad samples from male animals were spiked with Vtg and were analysed using the newly developed method, and female toads and spawn samples were tested and compared to the calibration curve obtained by the spiked samples.     

Propagation of Normal Axisymmetric Waves in Compliant Elastic Cylinders Filled with and Immersed in a Fluid

The paper studies the relationship between the physical characteristics of a cylinder and the properties of normal axisymmetric waves in elastic–liquid waveguides. The cylinder is made of a compliant material in which the velocity of shear waves is less than the sonic velocity in a perfect compressible liquid. The complete system of dynamic elasticity equations and the wave equation are used to describe the wave fields in the elastic cylinder and fluid, respectively. This approach allows obtaining the dispersion characteristics of coupled normal waves in compound waveguides over wide ranges of frequencies and wavelengths. The curves of real, imaginary, and complex wave numbers versus frequency are plotted for specific pairs of waveguide materials. Computations are carried out for a thick-walled cylinder filled with a fluid and immersed in either vacuum or a fluid. It is found out that compliant and rigid materials of the cylinder affect differently the wave interaction process in elastic–liquid waveguides